Test Coupling
Test coupling with Piston Valve Material: Steel or Stainless Steel Seal type: O-ring, Metal Joint, Elastomeric, or Taper Protection Cap: Knurled or Plastic Alternative materials and surface finishings are available upon request
Test Coupling
Test coupling with Piston Valve Connection: Straight 24° Fitting Comes in Light and Heavy series for different working pressures Material: Steel or Stainless Steel Fitting body can be supplied with union nuts and Cutting rings or Soft-sealing Cutting rings
Tank Accessories
Visual / electrical fluid level indication in hydraulic reservoirs with maximum tank pressure not exceeding 2 bar/ 29 PSI; ideal for application in which space is limited Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Standard housing made of Aluminium, black powder-coated, while other materials for spesifics use are available […]
Tank Accessories
Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environment Either for clamping installation (with 3 clamping jaws and cross-drive screws) or with a six-hole bolt pattern Operating temperature range: -40° C to +120° C Maximum Air Flow Rate : 1,00 […]
Tank Accessories
Combination of air breather and water removal filter, which dry the air from water vapor as a reservoir or gearbox breathes, then filtrated by 3 μm air filter element to remove any solid contamination particles Drying Agent are capable in changing colours with increasing moisture Connection: Male BSP thread (ISO 228) on Stainless Steel tube […]
Pressure Gauge
Stainless steel construction, can be complete with test point Quality ranges of 63 mm and 100 mm Dia Max. Pressure 1000 Bar Max. Temperature +60° C Accuracies +/- 0.5% – 1.6%
Filter Indicator
Visual Clogging Indicator comes as accessories need for most type of filters, and with coloured segments allow quick visual checking The gauge visually displays the degree of contamination of the element, differentiated with colour of Green, Yellow, and Red Green (0 to 2,5 bar / 0 to 36,25 PSI) indicates element has service life left […]
Offline Filter
High nominal flow rates by using high-quality gear pumps and energy-efficient, high-performance three phase motors suitable for continuous duty cycles, and long term operating times Nominal flow rate: 60 l/min (15 US GPM) Motor unit: 400 V; 50 Hz Micron rating available from 3 μm to 125 μm Weight approximately: 165 kg/ 364 lbs
Filter Element
Maximum resistance: 5 to 10 bar (72 to 145 PSI); with collapse/burst resistance as per ISO 2941 Sealing material: NBR Connection thread: BSP / UNF / NPT Filters material: Wire Mesh, Brass Mesh, Filter Paper, Inorganic Glass Fibre, Stainless Wire Mesh and Water Absorbing Filter Material Temperature range: -30° C to +100° C
Filter Element
Filter media: Inorganic Glass Fibre, Polyester Fibre, Cellulose Fibre, Stainless Fibre, and Stainless Mesh Micron rating: 3 μm to 1000 μ (different rating range for each media; alternative micron ratings on request) Maximum resistance: 10 to 25 bar (145 to 362 PSI); with collapse/burst resistance as per ISO 2941 Sealing material: NBR, FKM/FPM, and EPDM […]